My very own Guro Lolita bunny.

I did this for my farewell dinner of MARA Science College Seremban and the theme is East meets West where the boys wear west n girls wear eastern. so i went for wa lolita and cause i dont have a handbag, i bought a bunny and modify it into a dual function handbag/bunny soft toy. I am going to hold it with my right hand as if it's a real bunny. I haven't named it yet.

What i did was:

 (material: bunny, poster colour -better if acrylic paint or corn syrup- , 

white cloth, sewing kit, zipper, candle, bandage, plaster)

(the bottom before it was cut)

 Step 1: I took measurement and estimated the location of zipper.

 Step 2: I marked the back following the location of zipper.

Step 3: I cut out following the mark. 

Took out the cottons in the torso, leaving only head and limbs cotton in.

 Step 4: Using the white cloth, I cut out the seals for the limbs and head.

This is so that the cotton wont interrupt the space for the "handbag" part. 

After measuring, I sewed the seal to the appropriate place.

(this is the seal for the hand)

Step 5: I sealed the head.

 Step 6: Sealed the other hand.

Step 7: Sealed the buttock and feet. Be careful not to sew the seal of buttock too elevated (?) cause otherwise it'd look very obvious at the front.

 Step 8: I sealed the front body. Use like only half of the space left at the belly to divide the room for cotton and also my stuffs.

 This is how it'd look like. Now, I already have room to use as a handbag.

 Step 9: I sewed the zipper. 

And this was how it looked like after I was done.

(Actually this photo is upside down. This wass my sample of bloods using the mixture of red Buncho poster colour and many other colours and water.)

 Step 10: I used the mixture of red and black (ratio 3:1) to make the deepest red colour at the 'stab wound' and only red for the surrounding blood. Then I blended the two together to make the fake red look more bloody. 

As for the splatter, I used a water spray bottle and sprayed the mixture of red and black (ratio 5:1) without water. and sprayed it in one direction.

Precaution: Dont forget to cover some parts to control the splattered region.

As for the bandage, I used the same 5:1 ratio of red:black and just wipe the colours onto the bandage.

Step 11: This is the eyepatch.

I used facial cotton (brand: Guardian) and use the same 5:1 ratio to make the X mark. I also used some red manicure material.

Glued them together like in the picture.

That is where i'm gonna put the eye patch.

Step 11: I cut two pieces of horizontal (lines?) form the white cloth to complete the eye patch. 

Burn the sides of those two clothes, and made the burn mark obvious. Sewed where appropriate.

Step 12: I also used a plaster at the ear (though it's not very obvious) and wanted to make the dripping blood but it turned out wrong..oh well.

This is how it looks like overall. 

Guro Lolita bunny handbag done.

The back side.

This is how i'm gonna bandage my hand (the hand that'll hold the bunny) there's a small ribbon there and i'm gonna splatter the blood before the event starts...